Adosia IoT Base WiFi Control Module with Motion Detector


The Adosia IoT Base WiFi Control Module with a motion detector is the perfect custom WiFi controller for home automation projects and custom WiFi control systems requiring motion support.  Setup a motion-activated project or simply monitor motion activity.

Adosia’s IoT platform enables complete remote customization over your WiFi devices with thousands of possible configuration combinations.  Deploy functional WiFi systems within minutes with Adosia.

Out of stock


This Adosia IoT WiFi Control Module comes ready for connection to the Adosia IoT platform.  Module ships with a 12V/1A DC power supply and motion detector.

Adosia IoT Module Features:

  • diode-protected 12V DC transistor switch channels (x2) to safely drive:
    • water pumps
    • air pumps
    • motors
    • water valves
    • electronic deadbolts / locks
    • LED strip lighting
    • *any properly rated 12V DC component
  • inputs to drive any combination of water level switch or temperature sensor (x2):
    • monitor temperature with triggers and/or alerts at custom temps
    • monitor water level status with triggers and protect functions
  • digital IO pin 1 tied to motion detector
    • monitor motion and initiative component triggers or alerts
    • support for single-detect and multi-detect applications
  • digital IO pin 2 available
    • custom digital input or digital output (relay, etc)
    • support for additional motion detector
  • analog port to support gas sensor, soil moisture sensor, light sensor or sound sensor (x1)
    • monitor gas, soil moisture, light or sound levels
    • trigger actions on specific soil moisture levels
    • trigger alerts on specific soil moisture level triggering
  • supplemental breakout voltage supply headers providing:
    • GND (2x)
    • 3.3v (2x)
    • 5v (2x)
    • 12V (2x)


The Adosia IoT Platform

Adosia IoT Platform Features:

  • dream, build and deploy completely functional IoT systems within minutes
  • 100% remote device setup, monitoring and control
  • cycle, trigger, schedule, or set daily frequency for device operation
  • monitor soil moisture, water level status, and device temperature
    • trigger component or component group action based on user-defined settings
    • trigger alerts based on a variety of custom events
  • integrate motion-detect for monitoring, component triggers and/or alerts


  • custom control systems / home automation
  • motion-detect system
  • gardening / hydroponics / aquaponics
  • personal cultivation feeder control systems
  • refill water reservoir on detecting low water
  • temperature sensor triggered fan control
  • lighting / appliance power control
  • wide array of WiFi / IoT / relay applications

* transistor/diode switch channels can drive up to 450mA at supply voltage Vin


Additional information

Weight 5 oz
Dimensions 3 × 2.5 × 2 in
Arduino Compatible or ESP8266 WiFi

Arduino Uno (x4 Analog), ESP8266 (x1 Analog w/ WiFi)

Preload Software

none (hardware only), automatic garden, hydroponic garden, ultimate feeder


There are no reviews yet.

Be the first to review “Adosia IoT Base WiFi Control Module with Motion Detector”

Your email address will not be published.