Adosia IoT Base WiFi Control Module with Dual Relays + Motion Detector


Out of stock


This Adosia IoT WiFi Control Module comes ready for connection to the Adosia IoT platform.  Module ships with a 12V/1A DC power supply, motion detector, and dual relay module (relays must be run simultaneously from single IO signal when using motion detector).

Adosia IoT Module Features:

  • diode-protected 12V DC transistor switch channels (x2) to safely drive:
    • water pumps
    • air pumps
    • motors
    • water valves
    • electronic deadbolts / locks
    • LED strip lighting
    • *any properly rated 12V DC component
  • inputs to drive any combination of water level switch or temperature sensor (x2):
    • monitor temperature with triggers and/or alerts at custom temps
    • monitor water level status with triggers and protect functions
  • digital IO pin 1 tied to motion detector:
    • monitor motion and initiative component triggers or alerts
    • support for single-detect and multi-detect applications
  • digital IO pin 2 tied to dual 5V relays for switching AC devices in parallel:
    • 15A @ 120VAC each channel
    • 10A @ 240VAC each channel
  • analog port to support gas sensor, soil moisture sensor, light sensor or sound sensor (x1)
    • monitor gas, soil moisture, light or sound levels
    • trigger actions on specific soil moisture levels
    • trigger alerts on specific soil moisture level triggering
  • supplemental breakout voltage supply headers providing:
    • GND (2x)
    • 3.3v (2x)
    • 5v (2x)
    • 12V (2x)


The Adosia IoT Platform

Adosia IoT Platform Features:

  • dream, build and deploy completely functional IoT systems within minutes
  • 100% remote device setup, monitoring and control
  • cycle, trigger, schedule, or set daily frequency for device operation
  • monitor soil moisture, water level status, and device temperature
    • trigger component or component group action based on user-defined settings
    • trigger alerts based on a variety of custom events
  • integrate motion-detect for monitoring, component triggers and/or alerts


  • custom control systems / home automation
  • motion-detect system
  • gardening / hydroponics / aquaponics
  • personal cultivation feeder control systems
  • refill water reservoir on detecting low water
  • temperature sensor triggered fan control
  • lighting / appliance power control
  • wide array of WiFi / IoT / relay applications

* transistor/diode switch channels can drive up to 450mA at supply voltage Vin



Additional information

Weight 5.3 oz
Dimensions 3.5 × 3 × 2 in
Arduino Compatible or ESP8266 WiFi

Arduino Uno (x4 Analog), ESP8266 (x1 Analog w/ WiFi)

Preload Software

none (hardware only), automatic garden, hydroponic garden, ultimate feeder


There are no reviews yet.

Be the first to review “Adosia IoT Base WiFi Control Module with Dual Relays + Motion Detector”

Your email address will not be published.